Porcelain Drill Bit – Handle M14

Features – ARO / Type Vacuum / Height mm / Length mm / Thread M14 / Diameters Ø6 to Ø12 mm

  • Materials – Ceramic, stoneware, porcelain, ultra-compacted, fiberglass, polyester, glass, artificial stone, granite, terrazzo, slate, cobblestone, silestone, basalt, quartzite, corundum, porphyry, pumice stone, calcareous sandstone, limestone concrete, thermo-clay.
  • Alternative cutting – Artificial stone, solid brick, facing brick, machembrado, hollow brick, ceramic tile, ductile iron, aluminum.
  • Features – Type VB with diamond without metal bond welded to the support, which allows us to drill a multitude of materials.
    Drill bit that can drill, stone and non-stone materials.
  • Remarks – Use on standard mini grinders. The higher the power, the higher the performance in number of boreholes and drilling speed. WHEN DRILLING, ALWAYS DO OSCILLATIONS so that the power is always concentrated in one point and above all in large drills, because otherwise we will not advance due to lack of power.

Our Drill Bits are manufactured in Spain and follow all the quality standards.

Categories – Drilling & Porcelain Drill Bits

Porcelain Drill Bit – M14 Handle – Drill & Concrete Drill BitsInstagram

SOLGA DIAMANT uses cutting-edge technologies for the manufacture of its diamond drill bits, obtaining drill bits adjusted to the needs of the market offering high drilling speeds and high yields. Segments welded to laser or induction, depending on application. The continuous study of the different concretes and reinforced concretes result in the perfect adaptation of our drill bits and machines at the service of diamond drilling.

Available ranges of Water Drilling Drill Bits, Dry Drilling and Special Applications. Different alloys for hard, extra hard and abrasive materials. We also have available Rev Adjustment Table depending on the drilling diameter and the material to be cut from all the drill bits.

SOLGA Diamant has a wide range of specifications, see thefollowing table with the codes we have.

Table Available Coming Soon…

At SOLGA Diamant, our goal is the highest quality by offering the best service. We select our raw material suppliers with the same premise that we use in our manufacturing, guaranteeing the highest level of quality. In our production process, we use the latest technologies in sintering and welding, obtaining products of the highest quality at competitive prices. Our commercial network collects the needs of the different markets, managing with the factory the development of new drill bits, continuously innovating to offer the best solution to each need. All our bits are welded by laser welding, induction welding is also available.

To check availability of a specific diameter you can contact us in the Contact link and also for technical questions about any of our products.

SOLGA DIAMANT uses cutting-edge technologies for the manufacture of its diamond drill bits, obtaining drill bits adjusted to the needs of the market offering high drilling speeds and high yields. Segments welded to laser or induction, depending on application.

The continuous study of the different concretes and reinforced concretes result in the perfect adaptation of our drill bits and machines at the service of diamond drilling.

Scroll to Top