Laser Masonry Drill Bit M16 – L70mm Eco

Features – SEGMENTED / Laser Welding / Height mm / Length 70mm / Handle M16 / Diameters Ø68 and Ø82 mm

  • Materials – Masonry, artificial stone, solid brick, facing brick, machembrado, hollow brick, ceramic roof tile.
    concrete, sandstone, fibre cement, refractory brick, thermo-clay.
  • Alternative cutting – Granite, terrazzo, slate, cobblestone, silestone, basalt, quartzite, corundum, porphyry, pumice stone.
  • Features – We can drill up to 300 mm (drilling twice with the 150 mm drill bit).
    NEVER use on percussion or hammer. ALWAYS TO TURN.
  • Remarks – Use in powerful drills and hammers to be able to drill with large diameter and long length bits.
    Large diameter drill bits, low speed, small diameter drill bits, high speed.
    Sds plus and hex adapters are available. In lengths 100 and 220 mm.
    We have a 1/2 “gas to M-16 adapter to be able to use the bits in manual diamond drills.

Our Drill Bits are manufactured in Spain and follow all the quality standards.

Categories – Drill & Masonry Drill Bits

Laser Masonry Drill Bit M16 – L70mm EcoDrill & Concrete Drill Bits – Instagram

SOLGA DIAMANT uses cutting-edge technologies for the manufacture of its diamond drill bits, obtaining drill bits adjusted to the needs of the market offering high drilling speeds and high yields. Segments welded to laser or induction, depending on application. The continuous study of the different concretes and reinforced concretes result in the perfect adaptation of our drill bits and machines at the service of diamond drilling.

Available ranges of Water Drilling Drill Bits, Dry Drilling and Special Applications. Different alloys for hard, extra hard and abrasive materials. We also have available Rev Adjustment Table depending on the drilling diameter and the material to be cut from all the drill bits.

SOLGA Diamant has a wide range of specifications, see thefollowing table with the codes we have.

Table Available Coming Soon…

At SOLGA Diamant, our goal is the highest quality by offering the best service. We select our raw material suppliers with the same premise that we use in our manufacturing, guaranteeing the highest level of quality. In our production process, we use the latest technologies in sintering and welding, obtaining products of the highest quality at competitive prices. Our commercial network collects the needs of the different markets, managing with the factory the development of new drill bits, continuously innovating to offer the best solution to each need. All our bits are welded by laser welding, induction welding is also available.

To check availability of a specific diameter you can contact us in the Contact link and also for technical questions about any of our products.

Scroll to Top