Thread G25 Pearl HIP

Characteristics – Bead G25 / HIPQuality / Use Hard Concrete /
Assembly 40 P/m /
Diameter Ø10,5 mm / Main Characteristic High Speed

HIP pearl – The pearls manufactured using the HIP system have a higher diamond retention (95% retention, compared to 50-60% of other processes), they have been sintered by applying pressure in all directions on the alloy (by gas). This provides very versatile beads, with a high cutting speed and a very high yield.

  • Materials – Calcareous reinforced concrete, high strength reinforced concrete H30 and higher.
  • Alternative cutting of – Granite, Slate.
  • Characteristics
    RUBBER+ SPRING
    which allows us to be resistant to snagging. / VULCANIZATION Perfect rubber, which allows the use of the wire until the end, even with poor cooling / Can work up to 32 m/s / Cuts up to 90 % of reinforcement.
  • Remarks – For low and medium power machines. Ideal for multi-pulley machines.

Our Construction Threads are manufactured in Spain and follow all quality standards.

Categories – Building Wire – HIP Pearl

G25 Pearl HIP YarnConstruction Yarn – Instagram

SOLGA DIAMANT, leader in the manufacture of diamond wires, continuously develops wires that adapt to the needs of our customers, focusing the manufacture on constantly obtaining safe and top quality wires. In our production processes we use specially developed rubbers to obtain the maximum adherence in the cable and beads. Our sintering systems HIP offer the best choice in cutting reinforced concrete and iron. Completing the range with beads manufactured using the system Vacuum.

Our technical sales team will give you support to choose the best yarn for each occasion, analyzing the requirement.
of the job, the type of machine available and the material to be cut.

SOLGA Diamant has a wide range of specifications, see thefollowing table with the codes we have.

Table Available Coming Soon…

At SOLGA Diamant, our goal is the highest quality by offering the best service. We select our raw material suppliers with the same premise that we use in our manufacturing, guaranteeing the highest level of quality. In our production process, we use the latest technologies in sintering and welding, obtaining products of the highest quality at competitive prices. Our commercial network collects the needs of the different markets, managing with the factory the development of new drill bits, continuously innovating to offer the best solution to each need. All our bits are welded by laser welding, induction welding is also available.

To check availability of a specific diameter you can contact us in the Contact link and also for technical questions about any of our products.

Scroll to Top