Problems cutting with a diamond cutting disc?

Here we explain how to solve the most common problems that can occur when cutting with a diamond blade for stone or construction.

WHAT WE OBSERVE
ON THE DIAMOND BLADE
POSSIBLE CAUSESOLUTION
RAPID SEGMENT WEAR
SOLGA DIAMANT DIAMOND BLADE
– Unsuitable blade type
– Cooling or peripheral speed
low
– Change of blade type and quality
– Increase cooling and/or peripheral and ground speed
.
LATERAL SEGMENT WEAR
– The blade has not been working vertically and
curved or arched cuts have been made.
– The blade has roughed
The blade does not have the tape deck area.
clean or is incorrectly positioned
– Use suitable blade for the application
– Clean platen and blade
SATIN AND CLOSED
SEGMENTS
– Blade type not suitable for the
material
– Excessive speed
– Open the diamond using the blade in a
abrasive material
– Decrease speed
DARKENED SEGMENTS

– Lack of cooling
– Unsuitable blade type
– High peripheral speed
– Increase cooling
– Change of blade type
– Decrease peripheral speed
– Disminuir velocidad de avance
WEAR OF THE BASE OF THE
SEGMENT

-Highly abrasive material
– Unsuitable blade type
-Large depth of cut and poor cooling
cooling
– Change blade type
– Increase cooling
CRACKS IN THE STEEL
BODY
– Lack of cooling
– Center hole not centered
– Loss of support rigidity
– Change blade type
– Verify center hole
– Increase cooling
BLADE WITH DEFORMED SUPPORT
OR UNSTRESSED
– The disk has suffered a fall in the
machine or other accident.
– Reheating
– Use the tool correctly
– Increase cooling
SEGMENT BREAKAGE
– Support deformation
– Reheating
– Hooked
– Increase cooling
– Remove loose element from the cut

We have all encountered problems at some point cutting some material with diamond blades, but with these tips we can take our work to another level ?.

Do you have a question that does not appear in our tips? Can’t find the right diamond blade for the job you need to do? Write to us at web@solgadiamant.com and we will be happy to advise you. ?


?Learn more about our range of cutting blades ?

? That’s how easy it is to work with our cutting blades?

Follow us on Instagram!